Automatic Transmission/Transaxle: Technical Service Bulletins

• Customer Interest
  • A/T - ECO Start/Stop Inoperative, DTC P0944 Stored In TCM
• All Technical Service Bulletins
  • A/T - ECO Start/Stop Inoperative, DTC P0944 Stored In TCM
  • A/T - Choosing the Right ATF
  • A/T - Math Part II
  • A/T - Twenty Steps To Successful Repairs
  • A/T - Math Formulas Part I
    • Overview
    • Shift Speed and Pressure
    • Speedometer Ratios
  • A/T - Front Bushing Wear
  • A/T - Slipping or No-Shift/Metal Sealing Rings
  • A/T - How To Use A Pressure Gauge
  • A/T - Engine Vacuum Testing
  • A/T - Special Piston Removal/Installation Tool
  • A/T - (Exchange) Piston Bore Seal Modification
  • A/T - Piston Removal/Installation Tool
  • A/T - Harsh and Dual Engagement/Noise, Shudder
  • Unusual Shift Characteristics After A/T Replacement
  • A/T - No 2-3 Upshift at Full Throttle/Engine Cutout
  • A/T - Harsh Shifts into D & R/Chattering out of D & R
  • A/T - Humming Noise When Shifting to Reverse
  • No Down Shifting From 4-3 or 3-2 at Times
  • Selector Lever Blocks
  • Maintenance - Factory Approved Service Products
    • Overview
    • General Information
    • Engine Oil
    • Other Lubricants and Fluids
    • Fuel Requirements
      • 1. Gasoline Engines
      • 2. Diesel Engines
  • Transmission Fluid Dark or Black Does Not Smell Burned
  • Slippage 3-4 Shift or No 4th Gear Engagement
  • ATF & Parking Lock - Cautions
  • A/T - Double Engagement When Shifted Into Drive
  • A/T - Hard 2-1 Downshift When Starting Off
  • A/T - Shift Complaints After Changing Large Plate Gasket
  • A/T - Harsh Transmission Engagement in Rev.
  • Transmission Controls - Control Module Flashing Info.