General

For explanation of the symbols used in the test steps, Symbols Used For Test Equipment and Components

NOTE: Central locking (CL) and Anti-Theft Alarm (ATA) can be used via the IR transmitter key as well as the mechanical key (only (USA))

Activation of the PSE:
RCL control module (N54) is connected to the combination control module (N10-3) via a control wire. From the combination control module (N10-3) the necessary control signals are sent via two CAN data lines to the PSE.

NOTES:
- ATA functions have been integrated into the PSE control module (A37).
- The DTC fault memory for the PSE control module (A37) has been integrated into the combination control module (N10-3).
- Spare parts combination control modules (N10-3) must be reprogrammed as noted in "Code Programming". Programming and Relearning
- A quick function test can be accomplished using the Hand-Held Tester (HHT) for the activation of components and to read out actual values.
- Delayed headlamp shut-off (illumination time after ignition shut-off) can be programmed via the HHT (only (USA))