Alignment Specs
Vehicle AlignmentVehicle Level
With Electronic Clinometer
Front Axle
Up to 28.02.00 2.5° (-2.1 / +1.4)
As of 01.03.00 1.4° (-2.1 / +1.4)
with AMG lowering kit 0.6° (-0.7 / +0.7)
Rear Axle
Up to 28.02.00 1.2° (±1.0)
As of 01.03.00 0.4° (±0.8)
with AMG lowering kit 0.4° (±0.6)
NOTE: Use Clinometer 086, Sensor 086a, and Measuring Plate 086b
Lower left image = front measuring location
Lower right image = rear measuring location
Without Electronic Clinometer
Front Axle
Up to 28.02.00 +3 mm (-15 / +10)
with AMG lowering kit -20 mm (-5 / +5)
Rear Axle
Up to 28.02.00 +8 ± 10 mm
with AMG lowering kit 0 ± 5 mm
NOTE:
- Use measuring device (01) 201 589 00 21 00 for front axle.
- Use measuring device (02) 201 589 01 21 00 for rear axle.
Front Toe-in 0°20'±10'
Toe At 20° Turn -1°25'±30'
Front Camber (at vehicle level) Max deviation 20'
Up to 28.02.00
As of 01.03.00 +3.0° -0°54'±20'
+3.6° -0°27'±20'
+2.2° -1°01'±20'
+1.8° -1°05'±20'
+1.4° -1°09'±20'
+1.0° -1°12'±20'
+0.6° -1°16'±20'
+0.2° -1°21'±20'
-0.2° -1°25'±20'
-0.6° -1°30'±20'
-1.0° -1°35'±20'
-1.4° -1°39'±20'
-1.8° -1°44'±20'
Front Caster (VA=Front Axle Level; HA=Rear Axle Level)
Up To 28.02.00:
As Of 01.03.00:
NOTE:
- Measure front and rear axle level and obtain the front axle caster value (measured with the wheels turned 20°) from the table.
- Tolerance ± 30', max. difference between left and right 30'.
Example: Front axle level (20 mm or 6.4°) + Rear axle level (5 mm or -0.2°) = caster value (5°28' ± 30')
Rear Toe-in 0°33'±7'
Rear Camber (at vehicle level) [not adjustable]
Up to 28.02.00 +40 mm +3.9° -0°30'±30'
+30 mm +2.9° -0°45'±30'
+20 mm +1.8° -1°00'±30'
+10 mm +0.7° -1°15'±30'
0 mm -0.4° -1°30'±30'
-10 mm -1.5° -1°45'±30'
-20 mm -2.5° -2°00'±30'
-30 mm -3.6° -2°15'±30'
-40 mm -4.7° -2°34'±30'
-50 mm -5.8° -2°52'±30'
As of 01.03.00 +1.6° -1°13'±30'
+1.4° -0°16'±30'
+1.2° -1°18'±30'
+1.0° -1°21'±30'
+0.8° -1°24'±30'
+0.6° -1°27'±30'
+0.4° -1°29'±30'
+0.2° -1°32'±30'
0.0° -1°35'±30'
-0.2° -1°38'±30'
-0.4° -1°41'±30'
-0.4° -1°44'±30'