DTCM - Diagnostic Trouble Code Memory

WARNING: Risk of severe injury, ensure that no persons are within the deployment radius of the roll bar during testing and repair.

Fully extend the roll bar prior to performing any repair work. Keep body parts away from the roll bar deployment radius and its mechanism.


WARNING: Risk of severe injury, to eyes and skin from escaping high pressure hydraulic fluid spray.


Risk of poisoning due to consumption of hydraulic fluid.

Depressurize the hydraulic system prior to performing repair work Wear protective clothing and safety goggles.


Preparation for Test:
1. Battery voltage: 11 to 14 V,
2. Connect HHT and review section. Connecting Tester Or Scanner, Reading and Erasing DTC Memory

NOTE: The DTC fault codes, Activations and Actual Values can be found in the HHT Menu "UVS".

The Electronic Ignition Lock Control Module (N73) acts as a serial interface between the Power Soft Top Control Module (N52) and the HHT.






Special Tools







Diagnostic Trouble Code (DTC)