AR77.33-P-1006KA Remove/Install Soft Top Lock Unit

AR77.33-P-1006KA Remove/Install Soft Top Lock Unit







1 Open soft top

NOTE: Leave soft top compartment cover up

2 Remove paneling from soft top at front
3 Remove rubber weather strip (1)
4 Loosen glued joint between lock unit and soft top insulation

NOTE: Installation: Replace glued joint if required

5 Unscrew mounting screws (2)

CAUTION: Installation: Use screw securing agent

Screw for lock unit on roof tip - 8 N.m

6 Unscrew left and right mounting nuts (3) and remove tensioning cords
7 Remove lock (4) unit
8 Install in the reverse order