AR77.33-P-1007KA Remove/Install Soft Top Lock on Windshield Frame

AR77.33-P-1007KA Remove/Install Soft Top Lock on Windshield Frame







1 Completely open soft top
2 Remove A-pillar paneling at inside left
3 Remove left front door seal
4 Remove left door sill molding
5 Open wiring duct (1) in area of A-pillar
6 Disconnect soft top bow locked limit switch connector (S84/11x1)
7 Unscrew mounting screws (2) from lock bottom section (3)

NOTE: Mark position of lock bottom section (3), facilitates assembly

Screw for lock bottom section on windshield frame - 8 N.m

8 Install in the reverse order