Roll Bar Control Module: Service and Repair

AR77.39-P-3605KA Remove/Install Rollover Bar (RB)/Soft Top Operation Control Module







DANGER:
- Injury hazard from rollover bar extending
- Extend rollover bar before working in the rollover bar area

1 Partially open soft top

NOTE: Leave soft top compartment cover open and soft top bow in upright position

2 Disconnect battery

NOTE: Installation: Set timer, code radio

3 Remove rear mounting wall
4 Disconnect electrical connector (1)
5 Unscrew mounting nuts (2)
6 Remove soft top operation control module (N52)
7 Install in the reverse order