Interlinkage of Components

Interlinkage Of Components:

The power windows can be operated as follows:

- The rear windows can be controlled with the aid of the left rear power window switch (N72s3) and the right rear power window switch (N72s4), the front windows with the left front power window switch (front center console) (S21/1) and right front power window switch (front center console) (S21/2).

- All windows can be closed/opened centrally by pressing the power soft top switch (S84) twice within 0.5 s.


NOTE: This operation is performed only when the soft top is almost completely opened or closed.


- Convenience locking/unlocking of the vehicle with aid of infrared remote control.

- From the passenger door lock ((USA) only).

Inhibiting power window operation
Manual operation of the power windows is not possible while the soft top is in motion (opening, closing).

Continuous actuation
The operating time of the rear power windows is monitored to protect the components. If the switch N72s3 or N72s4 is pressed continuously the rollbar/soft top operation control module (N52) switches off the corresponding power window motor automatically after 25 s.


NOTE: During operation of the soft top N52 automatically activates the power windows.


In order to avoid load peaks and ensure that the windows run optimally into the seals the individual windows are actuated chronologically offset during convenience closing/opening and during operation of the soft top.