Function of Manual Window Up/Down Control

Function prerequisites
- Voltage not too low or too high and
- circuit 15 ON or circuit 15R ON

Power window manual up/down feature
The power window manual up/down feature can be started by pressing one of the power window switches to the first catch point in the opening or closing direction. Each power window can be operated separately.

- Front power windows
When the left front power window switch in the front center console (S21/1) or right front power window switch in the front center console (S21/2) is pressed the corresponding door control module receives a CAN message from the rollbar/soft top operation control module (N52) and actuates the appropriate power window motor until a different switch position is signaled.

- Rear power windows
When the left rear power window switch (N72s3) or right rear power window switch (N72s4) is pressed the rollbar/soft top operation control module (N52) receives CAN message from the lower control panel control module (N72) and actuates the appropriate power window motor until another switch position is signaled.

Termination of power window manual up/down function
The function is terminated when
- it is recognized that the power window is locked up.
- switches S21/1 or S21/2 is pressed continuously for longer than 25 s,
- the function prerequisites are no longer fulfilled.