Torque

TIGHTENING SPECIFICATIONS





Using the illustration, tighten the twelve-point hexagon socket head cylinder head bolts in four stages as follows:
1st stage: 15 Nm
2nd stage: 35 Nm
3rd stage: Turn 90°
4th stage: Wait 10 Min., then tighten an additional 90°

NOTE:
^ Oil thread and head contact surface of cylinder head bolts, insert and tighten in stages
^ It is not necessary to re-tighten the cylinder head bolts after engine has been run

Tighten cylinder head bolts to timing case cover bolts to: 25 Nm