Model 210 (Except Station Wagon)
Group: 82Number: 403
Date: September 1998
SUBJECT:
MODEL 210 (EXCEPT MODEL 21O.26/282)
MODEL YEAR 1999
INSTALLATION OF CD CHANGER
Warning:
Disconnect and cover negative battery terminal.
Note:
If a cellular telephone (CTEL) is also to be installed, the phone must be installed prior to the CD changer installation.
1. Remove shipping screws from CD changer and store the removed screws in the holes provided at the rear of the unit (arrow, Figure 1). Cover screw holes with supplied dust covers (adhesive black dots).
2. Make sure that the orientation adjustment on both sides of the CD changer are set to vertical (V). Secure with adhesive covers.
3. Remove trunk floor mat.
4. Locate 3-pole connector and fiber optic cable in left wheel well.
5. Attach CD changer to CD mounting bracket using four M4 x 5 machine screws.
6. Install cover. Engage plastic hinges over flange on top edge of bracket, then roll hinges toward back to lock.
7. Connect cables to the CD changer.
8. Position the CD changer unit so that the tabs on mounting bracket align over pre-drilled factory mounting locations.
9. Secure top mounts with screws.
10. Install CD magazine in to CD changer unit.
11. Reinstall trunk floor mat.
12. Reconnect battery and insert magazine. Test CD function. Verify correct version coding and system configuration using HHT.
Parts Information
Part Name Part Number / Exchange
CD changer Main Unit 002 820 7989 (new)
002 820 7989 90 (exchange)
1 Card
1 CD magazine 002 820 62 89
1 pr. Orientation covers (H/V) Q 6 82 0179
Installation kit contains: Q 6 82 0409
Main bracket
Hardware package
Cover
Recommended Labor Time