Models 210.265/282 (Station Wagon)
Group: 82Number: 402
Date: September 1998
SUBJECT:
MODELS 210.265/282 (STATION WAGON)
MODEL YEAR 1999
INSTALLATION OF CD CHANGER
Warning:
Disconnect and cover negative battery terminal.
1. Open and remove the right rear compartment panel.
For vehicles with Code 810 (Sound System) only:
2. Remove the three (3) screws securing the CD changer/sound system/cellular telephone bracket. Disconnect the sound system amplifier connector and remove the assembly.
3. Locate the 3-pole connector and fiber optic cable in right rear storage compartment.
4. Remove 3 shipping screws from CD changer. Make sure the orientation is set to V (vertical) and lock in place using adhesive covers.
5. Fasten the CD changer to the bracket using (4) M4 x 5 machine screws. Ensure proper orientation of lettering on door (eject button should be towards the front).
6. Connect harness connectors to changer. Reconnect harness connector to sound system amplifier (if disconnected). Connect the D2B fiber optics to the CD changer - refer to the proper configuration and diagram in the attached S.I.
7. Reinstall bracket assembly and secure using three (3) screws removed in step 2.
8. Insert magazine and test CD function. Verify correct version coding and system configuration using HHT.
Parts Information
Recommended Labor Time