Alignment Specs
Vehicle AlignmentVehicle Level
Front Axle
Model 210.08/28 1.2° (-2.1 / +1.4)
Model 210.6 7.2° (-2.2 / +1.6)
Rear Axle
Model 210.08/28
with level control 1.9° ± 1.0°
without level control 2.3° ± 1.0°
Model 210.6 1.3° ± 1.0°
NOTE: To measure vehicle level use (86) Electronic inclination measuring instrument (CM 9606)
Front:
Rear:
Front Toe-in 0°10'±10'
Toe At 20° Turn 1°32'±30'
Front Camber
NOTE:
- Measure front axle level and obtain camber value from the table.
- Tolerance ±20', max. difference between left and right 20'.
Example: Front axle level (20 mm or 0.5°) = camber value (-0°23' ± 20')
Front Caster (VA=Front Axle Level; HA=Rear Axle Level)
NOTE:
- Measure front and rear axle level and obtain the front axle caster value (measured with the wheels turned 20°) from the table.
- Tolerance ± 30', max. difference between left and right 30'.
Example: Front axle level (20 mm or 0.5°) + Rear axle level (5 mm or -0.6°) = caster value (5°22' ± 30')
Rear Toe-in 0°33'±7'
Rear Camber [not adjustable]
(at vehicle level) +40 mm -0°42'±30'
+30 mm -0°52'±30'
+20 mm -1°04'±30'
+10 mm -1°17'±30'
0 mm -1°30'±30'
-10 mm -1°44'±30'
-20 mm -1°59'±30'
-30 mm -2°16'±30'
-40 mm -2°34'±30'
-50 mm -2°52'±30'