Drive/Propeller Shaft
Testing and Inspection
Service and Repair- Procedures
- Removal and Replacement
- AR41.10-P-0050-02EA Dismantle Front Propeller Shaft From Transmission
- AR41.10-P-0050-03EA Detach Rear Propeller Shaft From Rear Axle Center Assembly
- AR41.10-P-0050-04EA Mount Rear Propeller Shaft to Rear Axle Center Assembly
- AR41.10-P-0050-07EA Mount Front Propeller Shaft to Transmission
- AR41.10-P-0050EA Remove/Install Propeller Shaft
- AR41.10-P-0200DA Replacing Centering Sleeve
- Overhaul
- AR41.10-P-0100-01DA Pulling Off Rubber Mount With Grooved Ball Bearing and Front Protective Cap
- AR41.10-P-0100-02DA Pressing grooved ball bearing out and in at rubber mount of propeller shaft
- AR41.10-P-0100-05DA Pressing Rubber Mount With Grooved Ball Bearing Onto Joint Fork
- AR41.10-P-0100-06DA Pull Rubber Sleeve Onto Joint Fork
- AR41.10-P-0200-02DA Removal of Centering Sleeve
Specifications
Technical Service Bulletins