B. Mounting the PSE and Linear Compensator

B. Mounting the portable support electronics (PSE) and linear compensator

1. Locate the:

- 25-pole D-connector

- coaxial cable from the front center console

- fiber optic connector

- integrated antenna coupling in the left rear quarter panel

Figure 1:

2. Mount the linear compensator to the installation bracket with three M4 x 10 screws and nuts (Figure 1). (The green 14-pole connector faces the two tabs opposite the mounting foot.)

3. Mount the PSE to the installation bracket with four M4 x 6 screws (Figure 1).

4. Connect the 25-pole side of the telephone Y-cable to the PSE and gently tighten the retaining screws (Figure 1).

5. Connect the green 14-pole connector to the linear compensator (Figure 1).

6. Tie together the excess cable and place it between the PSE and the compensator (Figure 1).