Body - Windshield/Rear Glass Body Seam Corrosion
Date: March 7, 2003Order No.: P-B-67.00/09
Supersedes:
Group: 67
SUBJECT:
Models 129, 140, 170, 202, 203, 208, 209, 210, 211, 215, 220 and 230
Corrosion of Weld at Sealing Flange of Windshield and Rear Window
When replacing the windshield and/or rear window in the above models, corrosion may appear under the polyurethane sealant in the area of the MIG weld (Figure 1). Remove the corrosion, clean the area (dust and grease free) and paint according to the guidelines from any one of the approved paint suppliers as listed in DTB P-B-98.00/14a.
In Case of Warranty