Programming and Relearning

Preparation for Test:
1. Fuses ok.
2. Battery voltage 11 - 14 V.
3. Voltage supply for control module and CAN wiring OK.
Refer ETP-Electrical Test Program.
4. Ignition: ON
5. Connect the Hand-Held Tester (HHT) to X11/4, according to diagram. Connecting Tester Or Scanner, Reading and Erasing DTC Memory

Activation:
The following components can be activated:
- ATA status indicator lamp
- Alarm horn (H3)
- Headlamps or tail lamps
- Hazard flasher







Special Tools