Discontinuation

Model 208 with CODE (275b) Memory package (driver's seat, rearview mirrors)

If the function prerequisites
- Associated vehicle door open or
- Circuit 15 ON and vehicle speed < 5 km/h or
- Circuit 15R ON and vehicle speed < 5 km/h

for the easy entry operations of moving the seat forward or back are no longer fulfilled, the longitudinal drive motion already started is completed before discontinuation of the sequence.

The sequence is interrupted immediately when the ESA control module
- recognizes that the voltage is too high or too low while a motor is actuated
- recognizes a malfunction in the position measurement
- recognizes that the front power seat switch (S91/2) or (92/2) is defective
- receives a CAN message for adjusting the seat.