AR91.60-P-0660G Remove/Install Airbag on Steering Wheel

AR91.60-P-0660G Remove/Install Airbag on Steering Wheel






Illustrated on model 170

WARNING: Uncontrolled firing of airbags, side airbags and emergency tensioning retractors poses an accident hazard. Testing and installation should be accomplished or supervised only by properly trained personnel. Store airbags and side airbags With opening surface pointing up. Do not expose to temperatures above 100 °C. Interrupt electric circuit when working on units.

NOTE: Observe legal regulations regarding handling and storing airbags, side airbags and emergency tensioning retractors.

1. Disconnect ground lead from battery.
2. Unscrew two screws (arrows). Hold airbag while screwing out.
3. Lift airbag out of steering wheel and disconnect connector from squib on gas generator.
4. Disconnect horn contact.
Render airbags, side airbags and emergency tensioning retractors unusable before disposal.
5. Reinstall in opposite order.

NOTE: After driver airbag has triggered it is always necessary to replace the steering wheel.

6. Ensure that combination switch returns automatically.
7. Perform system diagnosis. Testing and Inspection

Torque Specifications (Nm):
Dome head screw with Torx socket head
for airbag on steering wheel 8

Special Tool: