Headlamp Alignment Sensor: Service and Repair

Removing And Installing Front Axle Headlamp Range Adjustment Sensor

Model 208:

1 Open engine hood
2 Unscrew nut (6)
3 Remove right front wheel

NOTE: The sensor is located in the wheelhouse on the upper right wishbone

4 Unscrew nut (3) and separate connecting rod from front axle sensor for headlamp range adjustment.
5 Disconnect electrical connector (5)
6 Remove front axle sensor (headlamp range adjustment) (A52)

NOTE: After replacing the front axle sensor for headlamp range adjustment reprogram the zero position with the HHT

7 Reinstall in opposite order