AR68.10-P-1000K Remove/Install Instrument Panel

AR68.10-P-1000K Remove/Install Instrument Panel












1 Remove steering wheel
2 Remove instrument cluster
3 Remove bottom section of instrument panel on driver's side
4 Remove bottom section of instrument panel on passenger side
5 Remove center console
6 Remove side air nozzles on left and right
7 Remove center air nozzle
8 Remove paneling on A-pillars on left and right
9 Unscrew screw (3) and remove housing (2)
10 Disconnect connector (12) on housing (2) and lay housing down (2)
11 Unclip cover (4) on left and right at top and remove
12 Unscrew screws (5) on left and right
13 Unscrew screws (6, 7, 8 and 9)
14 Lift instrument panel (1), pull toward rear and remove

NOTE: Installation:
- Insert sheet metal clip nuts (6 each) for fastening instrument panel.
- Check gasket (10) above air outlet on heater housing and replace, if necessary.
- Insert instrument panel (11) with defroster nozzles (11) on heater housing, expose electrical wires.
- Check for proper function, set clock and adjust side windows, code radio

15 Lay instrument panel (1) down on suitable surface
16 Reinstall in opposite order