AR91.12-P-1030-01T Make Access Cover In Rear Seat Backrest Paneling

AR91.12-P-1030-01T Make Access Cover In Rear Seat Backrest Paneling
- with CODE (287a) Through-loading feature

An access cover must be made retroactively in order to remove the rear center armrest paneling.

Seal access cover with a suitable plug.







1 Mark the position of the access cover in the cover of the rear seat backrest at the top right (dimension a = 115 mm, dimension b = 9 mm).
2 Make access cover with a diameter of 9 mm.

When making the access cover, the top of the rear seat backrest paneling must be raised slightly using a suitable tool to prevent the parts underneath from being damaged.