B4 (Fuel Level Sensor)
B4 (Fuel Level Sensor)
Check Component B4 (Fuel Level Sensor).
Check actual value Fuel tank level
Note: The actual value is supplied through CAN bus from component A1 (Instrument cluster).
Status of relevant actual value:
- Fuel tank level: Note! Communication with ECU required
Specified value
- Fuel tank level > 10 l
Question
- Is the actual value o.k.?
Yes
The actual value is okay. ** End of Test **
No
The actual value is not o.k.
Note: If fault code P0460 is present: The fault is detected by component A1 (Instrument cluster) and an appropriate message is transmitted through the engine CAN to component N3/10 (ME-SFI control module).
Remedy
- The fuel tank level is too low.
- Read fault memory from control unit ICM and rectify faults.
** End of Test **