Hand-Held Tester (HHT) Version Coding and Programming

All new spare parts combination control modules (N10-1) which are installed and connected to the vehicle electrical system must be programmed with the following data, using the Hand-Held-Tester.

Version coding
- (USA)/ECE
- (CH)
- Right hand drive/left hand drive
- Model 210.0 (sedan)

Coding accessories
- ATA
- Driver seat with memory
- Passenger seat with memory
- Rain sensor

Important: The combination control module (N10-1) can be reprogrammed as many times as necessary.

CAUTION: Erasing the Combination Control Module (N10-1) DTC memory, will also erase the DTC memory for the Convenience Feature (CF) and Mirror, steering column adjustment, heated mirrors (MSC).