Calling Up Stored Position

Model 210 (except 210.081/281) as of March 1, 1997 with code(275a) Memory package(driver's seat, steering column, rearview mirrors.)

Model 208 with Code(275b) Memory package (driver's seat, rearview mirrors.)

Function prerequisites
- Voltage not too high or too low and
- Circuit 15R ON or
- Circuit 15 ON or
- Affected vehicle door open and
- Simultaneously no other memory button actuated
- No button for manual seat, mirror, or where applicable, steering column adjustment actuated.

Function
To call a stored rearview mirror position press one of the memory buttons 1 (S91/2s6), 2 (S91/2s7) or 3 (S91/2s8). The front driver- side door control module (N69/1) recognizes that a switch has been pressed and checks whether the prerequisites for this function are fulfilled. if so that front driver-side door control module (N69/1) transmits the CAN message for setting the stored seat and mirror position to the front passenger-side door control module (N69/2) and the driver-side ESA (with memory) control module (N32/1). Moreover, it performs the function of setting the stored outside mirror position on the driver-side outside rearview mirror (M21/6). This is accomplished as long as the switch is pressed and as long as the prerequisites for the function are fulfilled.
The front passenger-side door control module (N69/2) sets the stored outside rearview mirror position on the passenger-side outside rearview mirror (M21/7).

When a stored outside rearview mirror position is called up the driver's seat is also moved to the stored seat position.