Function Test - Section 11

Preparation for Test:
1. Voltage supply to all control modules and CAN data lines Ok,
2. Fuses ok,
3. Battery voltage 11 to 14 V,
4. Ignition: ON
6. Connect HHT and readout DTC'S.
7. Review General Information, Version Coding, Diagnosis, DTC Memory, Recalling Actual Values, Component Locations, Connection of Components and Preparation for Test.

Test Steps 1.0, 2.0 & 3.0:

Test Steps 4.0, 5.0, 6.0 & 7.0:

Test Steps 8.0, 9.0, 10.0, 11.0 & 12.0: