Alignment
Description and Operation
Service and Repair
- AR40.00-P-0202A General Information on Vehicle Level Measurement
- AR40.20-P-0200A Perform Chassis Alignment Check
- AR40.20-P-0230A Attach Mercedes-Benz Rapid-Clamping Devices
- AR40.20-P-0325A Check Toe-Out on Turns
- AR40.20-P-0331A Checking Rear Axle Camber
- AR40.20-P-0332A Check and Adjust Toe on Rear Axle
- AR40.30-P-0401B Preparations For Distance and Comparison Measurements
- AR40.30-P-0420A Checking Alignment of Spring Control Arm, Camber Strut, Strut Rod, Thrust Arm and Tie Rod on Rear Axle
- AR40.30-P-0425A Measuring Wheel Carrier (When Removed)
- AR40.30-P-0451C Measuring Steering Knuckle (Removed)
- Check and Adjust Front Caster and Camber
- Check and Adjust Front Wheel Toe
Specifications
- Alignment Specs
- BE33.20-P-1000-01A Test Specifications For Wheel Location, Wheel Hub
- BE40.20-P-1000-02D Vehicle Level - Front Axle
- BE40.20-P-1000-03D Vehicle Level - Rear Axle
- BE40.20-P-1000-07A Front Axle Toe
- BE40.20-P-1000-08A Toe-Out on Turns
- BE40.20-P-1000-10A Rear Axle Toe-In
- BE40.30-P-1000-05B Test Values For Distance and Comparison Measurements on Rear Axle
- Chassis Measurement Following an Accident
- Torque Specifications
Technical Service Bulletins
Tools and Equipment