Alignment Specs

Vehicle Alignment

Vehicle Level

Front Axle
Model 210 with code (979) Special protective version +5.4° (-2.1/+1.4)
Model 210 Classic/Elegance +6.0° (-2.1/+1.4)
Model 210 Avantgarde with sports suspension +2.1° (-2.1/+1.4)
Model 210 Suspension for increased ground clearance +8.2° (-2.1/+1.4)
Model 210 with AMG sports suspension +1.9° (-1.5/+0.7)
Models 210.055/072 with 957a, E36, E50 AMG +2.6° (-1.5/+0.7)
Models 210.074/274 E55 AMG +2.2° (-1.5/+0.7)


Rear axle
Model 210 with code (979) Special protective version with level control +5.4° (-2.1/+1.4)
Model 210 suspension for higher ground clearance +3.5° ±1.0

Models 210.00/01/02/03/04/05/06/07/Classic/Elegance
with level control +0.3° ±1.0
without level control +1.2° ±1.0

Model 210.00/01/02/03/04/05/06/07/Avantgarde/sports suspension
with level control -1.3° ±1.0
without level control -0.8° ±1.0

Models 210.004/035/037 with AMG sports suspension -0.8° (-1.0/+0.6)

Models 210.006/007/016/017/020/025/026/053/055/061
/063/065/070/072 with AMG sports suspension -0.6° (-1.0/+0.6)

Models 210.055/072 with 957a E36, E50 AMG -0.3° (-1.0/+0.6)
Models 210.20/21/22/23/26/27 Avantgarde/sports suspension -0.6° ±1.0
Models 210.20/21/22/23/26/27 Classic/Elegance 1.9° ±1.0
Models 210.074/274 E55 AMG -0.8° (-1.0/+0.6)

NOTE: To measure vehicle level use (86) Electronic inclination measuring instrument (CM 9606)

Rear:

Front:

Front Camber

Models 210.00/01/02/03/04/05/06/07/20/21/22/23/24/26/27:

Model 210.6:

Procedure: Measure front axle level and obtain camber value from the table.
Tolerance ±20'
Maximum difference between left and right 20'
Example: Front axle level (20 mm or 6.5°) = camber value (-0°28' ± 20')

Front Caster (VA=Front Axle Level; HA=Rear Axle Level)

Model 210.6:

Procedure: Measure front and rear axle level and obtain the front axle caster value (measured with the wheels turned 20°) from the table.
Tolerance ±30'
Maximum difference between left and right 30'
Example: Front axle level (20 mm or 6.5°) + Rear axle level (5 mm or -0.6°) = caster value (5°29' ± 30')

Model 210 front axle toe-in 0°10'±10'

Toe-out on turns with inner wheel steered through 20°
Avantgarde/sports suspension -1°32' ±30'
Suspension for increased ground clearance -1°30' ±30'
Classic/Elegance -1°32' ±32'
with AMG sports suspension -1°32' ±30'
Models 210.055/072 with 957a, E36, E50 AMG -1°33' ±30'
Models 210.08/28 -1°32' ±30'
Models 210.6 -1°30' ±30'


Rear Camber [not adjustable] (at vehicle level)

Model 210.0/2
+40 mm +3.0° -0°42' ±30'
+30 mm +2.0° -0°52' ±30'
+20 mm +2.0° -1°04' ±30'
+10 mm 0° -1°17' ±30'
0 mm -1.1° -1°30' ±30'
-10 mm -2.1° -1°44' ±30'
-20 mm -3.1° -1°59' ±30'
-30 mm -4.1° -2°16' ±30'
-40 mm -5.1° -2°34' ±30'
-50 mm -6.1° -2°52' ±30'

Model 210.6
+30 mm +2.8° -0°51' ±30'
+20 mm +1.8° -1°03' ±30'
+10 mm -0.8° -1°16' ±30'
0 mm -0.2° -1°30' ±30'
-10 mm -1.3° -1°45' ±30'

Model 210 with code (979 Special protection version, with code (Z04) light armoring, with code (Z06) B6 armoring
+40 mm +3.0° -0°42' ±30'
+30 mm +2.0° -0°52' ±30'
+20 mm +2.0° -1°04' ±30'
+10 mm 0° -1°17' ±30'
0 mm -1.1° -1°30' ±30'
-10 mm -2.1° -1°44' ±30'
-20 mm -3.1° -1°59' ±30'
-30 mm -4.1° -2°16' ±30'
-40 mm -5.1° -2°34' ±30'
-50 mm -6.1° -2°52' ±30'

Overall toe-in at rear axle 0°33' ±7'