Front Mounts of Rear Axle Mounting

NOTE:
^ Numbers in parentheses ( ) indicate a component or tool in the associated illustration.
^ Refer to Complete Rear Axle/Suspension, for additional information and procedures.

REMOVAL
Press rubber mount out of rear axle carrier using removal/installation tool No. 201 589 10 43 00 with (01c, 01d, 01e shown in illustration), or equivalents.
- Before inserting the collar (01e) press the rear axle carrier downwards slightly using a suitable tool, if necessary

INSTALLATION





Coat rubber mount (1a) with a suitable naphthalene H lubricant.

Draw in rubber mount (1a) using removal/installation tool with (01c, 01h, 01i shown in illustration), or equivalents.