Rear Mounts of Rear Axle Mounting

NOTE:
^ Numbers in parentheses ( ) indicate a component or tool in the associated illustration.
^ Refer to Complete Rear Axle/Suspension, for additional information and procedures. Service and Repair

REMOVAL
Press rubber mount (1b) out of rear axle carrier (1) using extractor/installer tool No. 201 589 11 43 00 with (01a-01c shown in the illustration), or equivalents.

INSTALLATION





Coat the rubber mount (01b) with suitable naphthalene H lubricant.

Pull in rubber mount (01b) using extractor/installer tool with (01c, 01f, 01g shown in the illustration), or equivalents.