With Front Seat Ventilation

Function prerequisite:
- Circuit 15R ON or circuit 15 ON

Function sequence
1 Press top half of left front HS and seat ventilation switch (N25/7s1)/ right-front HS and seat ventilation switch (N25/7s2) once.
The heated seat is switched on - stage 2.
Heating stage 2 is indicated by both red LEDs next to the switch coming on.
2 Press top half of N25/7s1/N25/7s2 again. The heated seat is switched back to stage 1. Heating stage 1 is indicated by one of the two red LEDs next to the switch coming on.
3 The heated seat control module controls the power to the heater elements in the seat depending on the heating stage selected.
4 The heating wire in the heating elements is heated up by the electricity going through.