FLACO (Oil Evacuation Equipment)

The FLACO oil extraction equipment is designed to extract waste oil via the oil dipstick of the engine, using the special M-B adapter.

^ Suction probes are provided for use to extract waste oil from other components such as the rear axle assembly.

^ The unit has a 15 gallon reservoir which holds the extracted waste oil, along with an oil level indicator.

^ With a flip of the control handle, the pump is converted to pump out the used oil into a used oil holding tank.

^ A pneumatic vacuum pump.

^ A full set of suction probes to extract used oil.

^ A 5 mm air hose (DN 6).

^ A 2mm oil extraction hose DN 16 with M-B adapter.

^ The unit rolls on 2 rigid and 2 swivel steering casters, which are lockable.

Accessories:

^ A large drain pan (accessory Part number 40 403 110), which is telescopically mounted and includes a removable strainer is available.

Technical Data:

Dimensions:

Width: 24.2 inches (615 mm)

Height: 34.8 inches (885 mm)

Length: 24.8 inches (630 mm)

Weight 132 lbs. (60 kg)

Pump Data:

Type of pump: diaphragm

Material of diaphragm: Buna N

Extraction capacity: max. 10 liters/minute 1)

Max. oil temp.: + 80°C

Max. size of impurities: max. 1.5 mm

1) Note: Max. waste oil extraction rate is 10 liters/minute which depends on type of suction probe used as well as temperature and viscosity of waste oil being extracted.

Air pressure Data:

Required air pressure: 102 psi

Air press. Connection: type 26 Dia. 7.2 mm

Air consumption: 15 CFM