Glove Compartment: Adjustments

AR68.10-P-1300M Adjusting Glove Compartment Lid

Illustrated On Model 220:

Adjusting

NOTE: During entire operation pay attention to uniform transition and gap all the way around (arrows) on the glove compartment lid (1) in relation to the instrument panel (2)

1 Pull out both expanding anchors (3) from glove compartment lid (4) with small screwdriver
2 Close glove compartment lid (1), adjust horizontal gap and transitions (arrows).

NOTE: Glove compartment lid (1) can be adjusted increment for increment on the hinge

3 Carefully open glove compartment lid (1) and press in expanding anchors (3)
4 Check gap width at side, adjust
- Differences in the gap width can be corrected slightly by loosening the mounting screws (4 each) for the glove compartment (4) and then moving.
5 Check transition from glove compartment lid (1) to instrument panel (2), adjust

NOTE: Adjustment is possible by screwing the two stop screws (5) in or out

6 Check for easy motion and proper function.