Dome Lamp: Service and Repair

AR82.20-P-0113M Remove/Install Rear Dome Lamp







1 Remove lens (1) on left/right rear dome lamp (E15/10, E15/11)

CAUTION: Pay attention to cleanliness

2 Pry left/right rear dome lamp (E15/10, E15/11) out of metal frame (3) in area of clips (2) with plastic wedge and swing downward in direction of arrow.
- Use clean plastic wedge to pry out

CAUTION: Ensure that plastic wedge is inserted between left/right rear dome lamp (E15/10, E15/11) and metal frame (3) and not between sheet metal frame (3) and headline

- See "Special Tools" below.

3 Disconnect dome lamp connector (E15/10x1, E15/11x1)
4 Install in opposite order
5 Check for proper function.


Special Tools

Installation Wedge P/N # 110 589 03 59 00: