91-075 Remove/Install Cover on Upper Belt Guide Fitting

91-075 Removing And Installing Cover On Upper Belt Guide Fitting







Installation note







Install covering so that screw for upper belt guide fitting with drive pin is positioned in mounting hole on louver (arrow).

Removal, installation







1 Unscrew screw (arrow).







2 Unscrew screw (arrows) and remove covering toward front.







3 Press cover on louver out from rear and thread belt out through separating point for cover.
4 Pull belt out of covering and lay covering to side.







5 During installation insert drive pin on screw for upper belt guide fitting into mounting hole in louver.