Cranking Engine Using A Remote Starter Button

PRECEDING WORK
Hood opened, raised to vertical position.

PROCEDURE





Ignition:
Switch off
Cover of engine component compartment (2):
Take off
Fit on
Cover of connector (X4/10):
Open
Fuse of connector (X27):
Pull off:
Fit on
Connector (S) of plug connection (X27):
Unplug
Plug in
Crocodile clamps (A) and (B) of compression pressure recorder 001 589 77 21 00:
Connect to pin 1 of connector (S) and connector (X4/10).
Engine:
Crank by pressing the contact handle (arrow) on compression pressure recorder.

CAUTION:
Engine, do not crank with ignition switch.