Convenience Closing/Opening With Transmitter Key

Convenience Opening/closing Via Infrared Signal Networking Of Components Shown On Model 203.0

Function requirements
- Circuits 15C, 15R and 15 off
- No overvoltage or undervoltage
- All doors closed and
- No other control module sending central opening/closing signals
- Unlock/Lock button on transmitter key (A8/1) pressed for longer than 1s.

Function
The corresponding control modules receive the CAN messages for convenience opening/closing and actuate the required motors. The motors remain actuated for as long as the button on the transmitter key is pressed. though for no longer than 25s.

The convenience opening/closing function for the power windows operates even if windows are not normalized.

The convenience opening/closing function is aborted if
- An obstruction is detected, or
- The request is no longer received via the CAN, or
- The function requirements listed above are no longer satisfied.