AR68.20-P-2310P Remove/Install Gearshift Lever Cover

AR68.20-P-2310P Remove/Install Gearshift Lever Cover

Shown On Model 203 With Selector Lever For Automatic Transmission:

Shown On Model 203 With Selector Lever For Automatic Transmission:

DANGER:
- Risk of explosion from explosive gas Risk of poisoning and caustic burns from swallowing battery electrolyte Risk of injure through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries
- No fire, sparks, naked flames or smoking
- Wear protective gloves, acid-resistant clothing and safety glasses Pour battery electrolyte only into suitable and appropriately marked containers

1 Disconnect ground cable of battery
2 Unclip gearshift lever paneling (1) out of gearshift lever cover (2) with long wedge

See "Special Tools" given below.

3 Pull shift lever covering (1) upward
4 Unclip gearshift lever cover (2) (arrows)
5 Disconnect connectors (3) from rear of shift lever cover(2)
6 Remove gearshift lever cover (2)
7 Install in the reverse order
8 Check for proper function


Special Tools

Longitudinal Wedge, P/N # 115 589 03 59 00: