AR35.31-P-0550-16PA Install Tapered Roller Bearing Inner Race on Drive Pinion and Press In Together With Radial Sealing Ring

AR35.31-P-0550-16PA Install tapered roller bearing inner race on drive pinion and press in together with radial sealing ring
- Rear axle center assembly dia. 185, 198, 210


Radial sealing ring and joint flange on drive pinion modified

Special Tools:

Special tool assignment
Drift (034) for rear axle differential 0 185 mm with previous radial sealing ring design: 208 589 00 15 00.

Drift (034) for rear axle differential 0 185 mm with new radial sealing ring design: 140 589 14 15 00.
Drift (034) for rear axle differential 0 210 mm: 208 589 00 15 00.

Drift (034) for rear axle differential 0 198 mm for previous radial sealing ring design: 140 589 08 15 00.
Drift (034) for rear axle differential 0 198 mm for new radial sealing ring design: 140 589 13 15 00

Component Identification:

1 Insert tapered roller bearing inner race (43d) into rear axle housing.
2 Press in tapered roller bearing inner race (43d) using drift (036 and puller (035).
3 Remove puller (035) with. drift (036) from rear axle housing.

Component Identification:

4 Coat sealing lip of new radial sealing ring (2) with oil and press in using drift (034).

The radial sealing ring (2) must be pressed in approx. 2 mm from the end face of the rear axle housing (up to the chamfer).

5 Remove drift (034) from rear axle housing.