Folding In Left/Right Outside Rearview Mirror

Folding-in Outside Rearview Mirror, Left/right (Illustrated For Left-hand Steering)

Function prerequisites
- No over or undervoltage
- Terminal 15R or 15 ON

Function
The outside rearview mirror housings can be folded in and Out electrically. Using the fold-in outside rearview mirror switch (S1s2) and the fold-out outside rearview mirror switch (S1s3) enables the mirror outside rearview mirror housings to be moved into the garage position (mirror housings folded in) or the driving position (mirror housings folded out).

The switching states for the outside rearview mirror's fold-in switch (S1s2) and outside rearview mirror's fold-out switch (S1s3) are evaluated by the front SAM control module with fuse and relay module (N10/1) and sent as a signal to the CAN-Bus. The left front, door-control module (N69/1 ), right front, door-control module (N69/2) then control the mirror folding in/out motor (M21/1m3)/(M21/2m3) in the left-hand/right-hand side of the outside rearview mirror housing. Motor actuation is only possible when the respective switch is pressed down .

At a speed of v > 25 km/h the mirror automatically adopts the driving position (folded out).