AN91.25-P-0001-04P Retrofit Control Valve on Front Seat

AN91.25-P-0001-04P Retrofit Control Valve On Front Seat







1. Fasten bracket (3) using blind rivets (3a) to seat frame.
2. Route pneumatic lines (1a) along the seat frame and clip into the bracket.
Make sure that installed lines cannot be chafed nor kinked.
Observe multi-contour seat control valve's lead assignment.







3. Slide multi-contour seat control valve (2) onto the bracket.
Make sure that the locking tabs on the bracket (3) snap into place.