Lens Adjustment of Left/Right Outside Rearview Mirror

Adjustment Of Left/right Outside Rearview Mirror (illustrated On Left-hand Steering Model)

Function prerequisites
- No over or undervoltage
- Terminal 15R or 15 ON

Function
Adjustment of the left and right outside rearview mirrors is done by switches located in the light switch module (S1). Selection of the mirror to be adjusted is done by the mirror adjustment switch, left (S1s4)/mirror adjustment switch, right (S1s5).

The outside rearview mirror rocker switch, high/low, inward/outward (S1s6) enables the following settings to be made:
- mirror glass adjustment, horizontal
- mirror glass adjustment, vertical

The adjustment message is sent by the front SAM control module with fuse and relay module (N10/1) to the CAN.

The left front, door-control module (N69/1), right front, door-control module (N69/2) analyze the CAN signal and move the mirror adjustment motor upwards and downwards (M21/1m1 )/(M21/2m1) and the mirror adjustment motor inwards and outwards (M21/1m2)/(M21/2m2).