Wiper and Washer Systems: Service and Repair

AR82.30-P-6400M Remove/Install Wiper System

Illustrated On Model 220:

Removal

DANGER:
- Injury hazard! Windshield wiper mechanism can pinch, crush or, in extreme cases, even sever extremities.
- Always remove ignition key when working on windshield wiper mechanism.

1 Remove wiper arms
2 Remove four spreading rivets (1)
3 Pull water deflector (2) upward out of channel (arrow)
4 Unscrew four nuts (3)

CAUTION: Do not turn knurled nut (5), otherwise inclination angle of wiper system will be changed

5 Disconnect connector (M6/1x1) from wiper motor
6 Remove wiper system (4)

Installation
7 Position wiper system (4)
8 Screw in 4 nuts (3)
- Nut for wiper system: 20 Nm

9 Move wiper motor to park position
10 Install water deflector (2)
11 Install wiper arms
12 Check windshield wiper for proper function.