Procedures

Removing And Installing Control Module And Switches For Left And Right Front Heated Seats







1 Unclip cover (1) (arrows), swing up and remove

See "Special Tools" given below.

2 Open connector (2) and cover (3), disconnect electrical connectors
3 Unclip front HS control module (N25/5) with left front heated seat (HS) switch (N25/5s1) and right front heated seat (HS) switch (N25/5s2) from remaining switch unit

NOTE: The control module and heated seat switches are one unit and can only be replaced as a complete unit

4 Reinstall in opposite order
5 Check for proper function

Special Tools

Long Wedge, P/N # 115 589 03 59 00: