Alignment Specs

Vehicle Alignment

Vehicle Level

Front Axle
Model 210.08/28 +1.2° (-2.1/+1.4)
Model 210.6 +7.2° (-2.2/+1.6)
Model 210 special protection +5.4° (-2.1/+1.4)


Rear Axle
Model 210.08/28
with level control +1.9° ±1.0
without level control +2.3° ±1.0

Model 210.6 +1.3° ±1.0
Model 210 special protection with level control +0.2° ±1.0

NOTE: To measure vehicle level use (86) Electronic inclination measuring instrument (CM 9606)

Front:

Rear:

Front Camber






Procedure: Measure front axle level and obtain camber value from the table.
Tolerance ±20'
Maximum difference between left and right 20'
Example: Front axle level (20 mm or 0.5°) = camber value (-0°23' ±20')

Front Caster






Procedure: Measure front and rear axle level and obtain the front axle caster value (measured with the wheels turned 20°) from the table.
(VA=Front Axle Level; HA=Rear Axle Level)

Tolerance ±30'
Maximum difference between left and right 30'
Example: Front axle level (20 mm or 0.5°) + Rear axle level (5 mm or -0.6°) = caster value (5°22' ±30')

Front Toe-in 0°10'±10'
Toe At 20° Turn 1°32'±30'

Rear Camber [not adjustable] (at vehicle level)

Model 210.0/2
+40 mm +3.0° -0°42' ±30'
+30 mm +2.0° -0°52' ±30'
+20 mm +2.0° -1°04' ±30'
+10 mm 0° -1°17' ±30'
0 mm -1.1° -1°30' ±30'
-10 mm -2.1° -1°44' ±30'
-20 mm -3.1° -1°59' ±30'
-30 mm -4.1° -2°16' ±30'
-40 mm -5.1° -2°34' ±30'
-50 mm -6.1° -2°52' ±30'

Model 210.6
+30 mm +2.8° -0°51' ±30'
+20 mm +1.8° -1°03' ±30'
+10 mm -0.8° -1°16' ±30'
0 mm -0.2° -1°30' ±30'
-10 mm -1.3° -1°45' ±30'

Model 210 with code (979 Special protection version, with code (Z04) light armoring, with code (Z06) B6 armoring
+40 mm +3.0° -0°42' ±30'
+30 mm +2.0° -0°52' ±30'
+20 mm +2.0° -1°04' ±30'
+10 mm 0° -1°17' ±30'
0 mm -1.1° -1°30' ±30'
-10 mm -2.1° -1°44' ±30'
-20 mm -3.1° -1°59' ±30'
-30 mm -4.1° -2°16' ±30'
-40 mm -5.1° -2°34' ±30'
-50 mm -6.1° -2°52' ±30'

Overall toe-in at rear axle 0°33'±7'