GF82.70-P-2000B Activating/Accepting Call, Function

GF82.70-P-2000B Activating/Accepting Call, Function

MODELS 140, 202,203 up to 23.4.04,208.3, 210,215, 220 up to 31.8.03
- with CODE (813) Voice control system (VCS)







Shown on models 202, 203, 208.3, 210, 215, 220 as of 6/1/00
A Activating, accepting call (pull toward driver)
S93/2 VCS switch







Illustrated on model 220 up to 31.5.00
S93/2 VCS switch

Function
By operating the VCS switch (S93/2) the voice recognition of the voice control system (VCS) is activated. The following model series dependent control units are used for this purpose:
- In the voice control module (A35/10a1) of the telephone transmitter/receiver/voice control system (A35/10) (models 140, 210 up to 5/31/98).
- in the voice control system control unit (A35/11) (models 202, 203, 208, 210 as of 1.6.98, 215, 220).

Simultaneously the VCS is actuated, which is signaled to the user by an acoustic signal (beep). Furthermore, the hands-free system and thus muting of the particular vehicle-specific component of the audio system becomes active to ensure the greatest possible stability of the user voice input.

The system is then in the Input mode. From this time on, input commands are available to the user, which permit him/her, via the hands-free system microphone (B25), to connect to the system and control it via the input commands (spoken input).

If the system does not immediately detect an entry, the sensitivity of the system is increased in step 1. If there still is no entry, the VCS is deactivated after approx. 15 s.

Accepting call
On models 140, 202, 203, 208.3, 210, 215 and 220 without multifunction steering wheel (MFL) the VCS switch (S93/2) has to be actuated in order to accept an incoming call, which corresponds to taking the telephone receiver off the hook when leading a conventional telephone call.

On models 203, 208.3, 210, 215 and 220 with multifunction steering wheel (MFL) an incoming phone call is accepted via the accept/ terminate phone call button (S111s3).

After activation, the particular vehicle-specific component of the audio system is also muted here to ensure the greatest possible stability of the user voice input. It is also possible for the user to use the handsfree system microphone (B25) for the call.

The voice output of the system is accomplished dependent on the model series via one or several hands-free system speakers.