GF82.70-P-0003CE Telephone (GSM), Function

GF82.70-P-0003CE Telephone (GSM), Function
- with CODE (274) MB D network telephone [MODELS 129, 140, 202, 210]
- with CODE (314a) "Standard" D network telephone [MODELS 129, 140, 170, 202, 208, 210]

Fixed installation, function
A call can be set up different ways depending on the model and equipment specification (voice control system), provided that the PIN has been entered, the system logged in and ready (switched on). Calls are conducted via the telephone antenna.

The differences in the antennas for the telephone systems result from vehicle-specific factors (convertible, sedan, T-model etc.). This in turn requires the use of different vehicle antennas, speakers etc., depending upon the type of (vehicle) antenna and its equipment specification an antenna splitter (A28/1) can also be used. On all models it is possible to conduct a call via the vehicle's handsfree system which greatly enhances driving safety. Here the call is conducted via the handsfree system microphone (B25) and the handsfree system speaker , the handset remains in the receptacle.

In this case the display on the handset or portable cellular telephone shows a sequence of displays, which inform the user of the operating condition (e.g. menu selection) of the telephone.

The volume of the speaker on the handset and therefore the volume of the handsfree system can be individually set by the user to suit on the handset.

In order to ensure that the user's voice input via the handsfree system's microphone is not distorted in any way, the radio is automatically muted for the duration of the call.

Further information is available in each of the respective owner's manuals.