Chassis Specific Locations

Motor Electronics (ME-SFI) Fuel Injection And Ignition System Arrangement Of Components

Model 210




B37 Accelerator pedal sensor
K27 Fuel pump relay
K40/4 Fuse and relay module, front-passenger side with:
k2 Relay starter
k3 Air pump relay
N3/10 ME-SFI control module
X11/4 Datalink connector




B4/3 Fuel tank pressure sensor (only (USA))
Y58/1 Purge control valve
Y58/4 Activated charcoal canister shutoff valve (only (USA))
77 Activated charcoal canister




A1e26 CHECK ENGINE malfunction indicator lamp (only (USA))
A1e58 Malfunction indicator lamp for the engine diagnostics (only for low emission EURO3/4)
X11/22 Datalink connector for Diagnostic II




Engine 111
B2/5 Hot film mass air flow sensor with intake air temperature sensor
G3/2 O2 sensor upstream of catalytic converter
Y58/1 Switchover valve for regeneration




Engines 112, 113
G3/3 Left O2 sensor upstream of catalytic converter
G3/4 Right O2 sensor upstream of catalytic converter
G3/5 O2-Sensor on the left downstream of catalytic converter ((USA) and low emission EURO3/4)
G3/6 O2-sensor on the right downstream of catalytic converter ((USA) and low emission EURO3/4)




Engine 104
A1e26 CHECK ENGINE malfunction indicator lamp (USA)
G3/1 O2 sensor downstream of catalytic converter (USA)
G3/2 O2 sensor upstream of catalytic converter
X11/22 Datalink connector for Diagnostic II




Engine 104
Y3/3 Upshift delay switchover valve 2nd transmission mode switchover valve
Y58/1 Switchover valve for regeneration