GF82.70-P-2001B Terminating/Ending Call, Function

GF82.70-P-2001B Terminating/Ending Call, Function

MODELS 140, 202,203 up to 23.4.04,208.3, 210,215, 220 up to 31.8.03
- with CODE (813) Voice control system (VCS)







Shown on models 202, 203, 208.3, 210, 215, 220 as of 6/1/00
B Terminating, ending call (press away from driver)
S93/2 VCS switch







Illustrated on model 220 up to 31.5.00
S93/2 VCS switch

Abort
If the VCS switch (S93/2) is actuated during a phone call, then the voice recognition of the voice control system (VCS) is deactivated and the existing connection is terminated.

The voice recognition system is located:
- In the voice control module (A35/10a1) of the telephone transmitter/receiver/voice control system (A35/10) (model 140, 210 up to 5/31/98).
- in the voice control system control unit (A35/11) (models 202, 203, 208, 210 as of 1.6.98, 215, 220).

This is possible at any point during the call. If the user is in the entry mode, they can exit the voice recognition and deactivate the system via the voice command "End" via the handsfree system microphone (B25). This is also possible at any point in the input mode.

Ending call
On models 140, 202, 203, 208.3, 210, 215 and 220 without multifunction steering wheel (MFL), the VCS switch (S93/2) has to be activated (pushed away from the driver) after ending a phone call in order to terminate the connection.

On models 203, 208.3, 210, 215 and 220 with multifunction steering wheel (MFL), the connection is terminated via the accept/terminate phone call button (S111s3) and not by operating the VCS switch (S93/2).

If the driver does not end the telephone call, the VCS does not consider the call as terminated. As a result, the VCS cannot recognize an incoming call.