Global Positioning System: Service and Repair

AZ54.61-P-0001-02T Retrofit Wiring Harness For Electronic Vehicle Log






1 Drill a hole (arrow) of dia. 6 mm in the top left corner of the glove compartment from the front.
2 Pass wiring harness for electronic vehicle log through the hole behind the glove compartment and from there to the radio recess.

Wiring harness for electronic vehicle log






ge Yellow line, circuit 15
rt Red wire, terminal 30
sw Black wire, terminal 31






3 Connect the red/white line (rt/ws) from the cigarette lighter to the yellow line (ge) from the wiring harness for the electronic vehicle log by means of terminal connector.
4 Connect red/yellow wire (rt/ge) from radio to red wire (rt) from wiring harness for electronic vehicle log using a cable connector.
5 Connect brown wire (br) from cigarette lighter to black wire (sw) from wiring harness for electronic vehicle log using a cable connector.
Cable colors on example of model 211. In the event of deviating cable colors, check the cable assignment from the connection.